Sharp FO IS125N - B/W Laser - All-in-One Service Manual page 68

FO-IS125N
SW152 No. 4 Authorized transmission
Used to enable the authorized transmission function.
SW152 No. 5, No. 6 To be authenticated
Used to select the communication mode using the authorized trans-
mission function.
SW152 No. 7, No. 8 Notice to the sender
Used to select the result notification method to the sender using the
authorized transmission function.
SW153 No. 1, No. 2 Automatic elimination
Used to set the elimination time of the communication data using the
authorized transmission function.
SW153 No. 3 Search method by right and left key
Used to set the display items when displaying the other party using the
right and left keys.
SW153 No. 4 Warning when login fails
Used to specify whether or not to give warning when login fails for the
third time in a raw with the user control function enabled.
SW153 No. 5 ~ No. 8 Reserved
SW154 ~ SW156 No. 1 ~ No. 8 Reserved
SW157 No. 1 V.34 mode function
Used to select the V.34 mode for communication when set to "1" com-
munication method is V.34 mode.
SW157 No. 2 V.34 mode function in case of manual communica-
tion
Used to select whether the V.34 mode is made valid when automati-
cally transmitting/receiving.
SW157 No. 3 V.34 control channel communication speed
Used to select the control channel communication speed for V.34
mode.
SW157 No. 4 ~ No. 8 Reserved
SW158 No. 1 ~ No. 4 V.34 mode transmission speed
Used to determine the initial modem speed when communication
method is V.34 transmission mode.
SW158 No. 5 ~ No. 8 V.34 mode receiving speed
Used to determine the initial modem speed when communication
method is V.34 reception mode.
SW159 ~ SW241 No. 1 ~ No. 8 Reserved
SW242 No. 1 ~ No. 7 Reserved
SW242 No. 8 Pre-heat timing
Used to select whether to start pre-heat when starting reception or to
start it after the print data is ready.
SW243 ~ SW300 No. 1 ~ No. 8 Reserved
2 – 55