Tcp Server Mode; Figure 2.4 Tcp Server Mode; Tcp Client Mode; Figure 2.5 Tcp Client Mode - Advantech EKI-1351 User Manual

1/2-port rs-232/422/485 to 802.11b/g wlan serial device servers

Hide thumbs Also See for EKI-1351:

Table of Contents

2.1.3

TCP Server Mode

In TCP server mode, you might initiate the TCP connection from host to EKI serial

device server. This operation mode support max. five simultaneous connections for

each serial port on EKI serial device server from one host or several hosts, however

multi-hosts collect the data from one serial port at the same time

2.1.4

In TCP Client mode, the TCP connection will be established from EKI serial device

server. This operation mode supports maximum four simultaneous connections for

each serial port on EKI-1351/1352 to one host or several hosts. You should configure

the IP address and TCP port number of the network hosts which the EKI serial device

server connect to using Advantech Serial Device Server Configuration Utility. After

configuration, when EKI serial device server receives the data from serial port, the

device server will employ the connection to hosts which are configured.

EKI-1351/1352 User Manual

Table of Contents

Eki-1352