Sdms Drivers - Advantech PCM-9570/S User Manual

Socket 370 celeron/pentium iii sbc with lcd, ethernet and scsi
Hide thumbs Also See for PCM-9570/S:
Table of Contents

Advertisement

6.6 SDMS drivers

The SDMS device drivers translate an operating system I/O request
into a SCSI request. Each Symbios SCSI device driver is operating
system specific and is designed to work on standard Symbios chip
implementations.
We provide PCI SDMS device drivers for the following operating
systems:
MS-DOS/Windows
Windows 95/98
Windows NT - 3.51 and above
OS/2 4.x Warp
SCO UNIX - Open Server 5.0.2 and above
Novell NetWare - 3.12, 4.11 (NWPA)
Note:
Setup is inspecting your computer's hardware
configuration...
While this is on the screen (before entering the initial blue screen),
press the F6 key. Windows NT setup will allow a SCSI driver to be
added before the second disk is requested. Add the appropriate driver
from a prepared floppy disk. Follow the rest of the instructions to
finish the installation.
64
PCM-9570/S User's Manual
When you start the Windows NT installation with
either a CD-ROM boot or from the floppy disks, a
black screen will initially appear with the following
text at the top:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcm-9570

Table of Contents