Table of Contents
Advertisement
2.22 SCSI connectors (CN4)
The PCM-9570/S has a 68-pin D-sub connector for Ultra2 SCSI
devices. Connection of SCSI devices requies special attention,
especially when determining the last drive on the SCSI chain. Refer to
Chapter 6 and your device's operating manual for detailed installation
information.
2.23 PanelLink (CN22) (optional)
The PCM-9570/S optional PanelLink function uses Silicon Image
Inc.'s Universal Transmitter SiI150 chip. It can support 25 ~ 112 MHz
clock speeds, for VGA through to SXGA LCD panels. The 20-pin
PanelLink transmitter connector is Hirose Electric Co., Ltd.'s product
no. DF13A-20DP-1.25V.
30
PCM-9570/S User's Manual
Advertisement
Table of Contents
