Dell 1135N Service Manual page 93

■ EDC Mode Menu
0. Cover Status
Item
Front Cover
1. Sensor Status
Item
Regi/Feed/Exit Sensor
Empty
2. Motor Test
Item
Main Mtr Nor.
Slow
3. Fan Test
Item
Fuser Fan
4. Clutch Test
Item
Pick up Clutch
Regi Clutch
Service Manual
Alignment and Troubleshooting
When the front cover opened, "Open" message display LCD. If the front
cover closed, "Closed" message display LCD.
Manually open and close the actuator of the sensor [Regi, Feed, and/or
Exit Sensor] you wish to check, the message "Without Paper" and "With
Paper" message will be displayed.
Manually open and close the actuator of the Empty Sensor, the message
"Present" and "Empty" message will be displayed.
If "OK" key is pushed after "ON" displayed, motor will be run. Main motor
will auto - stop after 60 seconds and "OFF" message will be displayed.
If "OK" key is pushed after "ON" displayed, motor will be slowly run.
Main motor will auto - stop after 60 seconds and "OFF" message will be
displayed.
If "OK" key is pushed after "ON" displayed, fan will be run. Fuser fan will
auto - stop after 10 seconds and "OFF" message will be displayed.
When "OK" key is pushed after "ON" message displayed, clutch turns on.
Pick up Clutch will be turn off after 3 seconds and "OFF" message will be
displayed.
When "OK" key is pushed after "ON" message displayed, clutch turns on.
Regi Clutch will be turn off after 3 seconds and "OFF" message will be
displayed.
4-20
Description
Description
Description
Description
Description