Table of Contents
Advertisement
Load Default
Press ESC to return to the main menu then use the ENT button to select. This function resets all
settings to their factory default. This function helps th e system recover from errors caused by an
illegal operation.
Press ENT to enter the following screen. Use the Up and Down bu ttons to con rm reset to factory
defaults.
If Load Default OK, this will be displayed on the LCD as shown below.
Copy HPA
If this function is set to "ON", the system will complete ly copy the data in a source HDD's host
protected area.
The default is "OFF". Use the
Burn In
This function is used to burn test the system reliability.
Press ENT to enter the following screen.
Use the Up and Down buttons to choose Compare, Async Copy & Cmp and Async Compare, then
press ENT to con rm.
www.addonics.com
11-07.Adv Setup
Load Default
Load Default
Con g? Yes
Load Default
Ok
11-08. Adv Setup
Copy HPA
ENT , Up and Down buttons to change this to "On".
11-09. Adv Setup
Burn In
Burn In Mode
Copy & Compare
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
