Table of Contents
Advertisement
Adv Setup
Adv Setup o ers expert users access to more advanced system settings.
To access this option, hold down the ESC key for two seconds until it appears.
Read Error Skip
This function sets the system to ignore any errors during the copying process. Normally if there is
an error during copying a warning is displayed on the LCD. By using this function, users can also
copy a HDD with errors.
Press ENT to enter the following screen. By default this option is set to OFF. Use the up and down
buttons to enable or disable this option.
Update Firmware
This function is used to update the system's rmware. Download the latest version of the rmware
from the Internet at www.addonics.com. For the complete instructions, visit the rmware update
webpage or view the instructions found later in this manual.
Compare Firmware
This function is used to compare the current system rmware version with the new version the user
is upgrading to. This ensures that the downloaded rmware is the latest version. The message
"Last update F/W" indicates that it is the latest version.
11-03.Adv Setup
Compare Firmware
Quick Erase HDD
This function is used to quickly erase all data on the HDD
before using this function.
Press ENT to enter the following screen. Use the Up and Down
erase.
www.addonics.com
11. Adv Setup
11-01. Adv Setup
Read Error Skip
Read Error Skip
O
11-02. Adv Setup
Update Firmware
Searching F/W ...
Please Wait ...
11-04.Adv Setup
Quick Erase HDD
Quick Erase HDD
ALL/Target CH:*
Technical Support (M-F 8:30am - 6:00pm PST)
Last update F/W
OK!
. Please backup any important data
buttons to select the HDD to
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
