Table of Contents
Advertisement
Load Default
Press ESC to return to the main menu then use the ENT button to select. This function resets all
settings to their factory default. This function helps th e system recover from errors caused by an
illegal operation.
Press ENT to enter the following screen. Use the Up and Down bu
defaults.
If Load Default OK, this will be displayed on the LCD as shown below.
Link Option
NOT AVAILABLE
USB Auto-Link
NOT AVAILABLE
Copy HPA
If this function is set to "ON", the system will complete ly copy the data in a source HDD's host
protected area.
The default is "OFF". Use the
www.addonics.com
10-07.Adv Setup
Load Default
Load Default
Load Default
Ok
10-10. Adv Setup
Copy HPA
ENT , Up and Down buttons to change this to "On".
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
Table of Contents
