f) display assembly
g) system board
3.
Disconnect the power-connector cable from the computer.
Installing the Power Connector
1.
Connect the power-connector cable to the computer.
2.
Install:
a) system board
b) display assembly
c) palmrest assembly
d) keyboard
e) base cover
f) SD card
g) battery
3.
Follow the procedures in
Removing the System Board
1.
Follow the procedures in
2.
Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest assembly
f) sniffer board
g) display assembly
3.
Disconnect the system-fan cable.
34
After Working Inside Your Computer .
Before Working Inside Your Computer .