Installing The Sniffer Board; Removing The Display Assembly - Dell Latitude 6430u Owner's Manual

Installing the Sniffer Board

1. Place the sniffer board in its slot on the computer.
2. Tighten the screw that secures the sniffer board to the computer.
3. Connect the sniffer-board cable.
4. Remove:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
5. Follow the procedures in

Removing the Display Assembly

1. Follow the procedures in
2. Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest assembly
3. Disconnect the LVDS and camera cable from the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31