Power connector port
Removing the power connector
1. Follow the procedure in
2. Remove the:
a.
battery
b.
hard drive
c.
optical drive
d.
base cover
e.
I/O board
f.
GPS board
g.
WLAN card
h.
WWAN card
i.
hard drive tray
j.
system board
3. To remove the power connector:
a. Peel the adhesive tape to access the power connector [1].
b. Pull and lift the power connector away from the computer [2].
Installing the power connector
1. Place the power connector onto the slot in the computer.
2. Affix the adhesive tape to secure the power connector.
3. Install the:
a.
system board
b.
hard drive tray
c.
WLAN card
d.
WWAN card
e.
GPS board
f.
I/O board
g.
optical drive
h.
hard drive
i.
base cover
48
Disassembly and reassembly
Before working inside your
computer.