e) palmrest assembly
3.
Un-route the fingerprint-scanner cable. Remove the screw that secures the fingerprint-scanner bracket to the
computer and remove the fingerprint-scanner bracket. Remove the fingerpint-scanner board from the computer
Installing the Fingerprint-Scanner Board
1.
Place the fingerprint-scanner in its slot on the computer.
2.
Place the fingerprint-scanner bracket on it and tighten the screw to secure the fingerprint-scanner bracket to the
computer.
3.
Route the fingerprint scanner cable.
4.
Install:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
5.
Follow the procedures in
Removing the Display Bezel
1.
Follow the procedures in
2.
Remove the battery.
3.
Pry the sides and work around the corners of the display bezel and remove it from the display assembly.
After Working Inside Your Computer .
Before Working Inside Your Computer .
21