Displaying Smartports Macros - Cisco 2950 - Catalyst Switch Configuration Manual

Displaying Smartports Macros

Displaying Smartports Macros
To display the Smartports macros, use one or more of the privileged EXEC commands in
Table 12-2 Commands for Displaying Smartports Macros
Command
show parser macro
show parser macro name macro-name
show parser macro brief
show parser macro description [interface
interface-id]
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
12-8
Purpose
Displays all configured macros.
Displays a specific macro.
Displays the configured macro names.
Displays the macro description for all interfaces or for a specified
interface.
Chapter 12 Configuring Smartports Macros
Table 12-2.
78-11380-10