Displaying Rmon Status - Cisco 2950 - Catalyst Switch Configuration Manual

Displaying RMON Status

Command
Step 6 show rmon statistics
Step 7
copy running-config startup-config
To disable the collection of group Ethernet statistics, use the no rmon collection stats index interface
configuration command.
Displaying RMON Status
To display the RMON status, use one or more of the privileged EXEC commands in
Table 26-1 Commands for Displaying RMON Status
Command
show rmon
show rmon alarms
show rmon events
show rmon history
show rmon statistics
For information about the fields in these displays, refer to the Cisco IOS Configuration Fundamentals
Command Reference for Cisco IOS Release 12.1.
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
26-6
Purpose
Display the contents of the switch statistics table.
(Optional) Save your entries in the configuration file.
Purpose
Displays general RMON statistics.
Displays the RMON alarm table.
Displays the RMON event table.
Displays the RMON history table.
Displays the RMON statistics table.
Chapter 26 Configuring RMON
Table 26-1:
78-11380-10