Configuring Storm Control - Cisco 2950 - Catalyst Switch Configuration Manual

Configuring Port-Based Traffic Control
This chapter describes how to configure the port-based traffic control features on your Catalyst 2950 or
Catalyst 2955 switch.
Note For complete syntax and usage information for the commands used in this chapter, refer to the command
reference for this release.
This chapter consists of these sections:
•
•
•
•
•

Configuring Storm Control

These sections include storm control configuration information and procedures:
•
•
•
•
78-11380-10
Configuring Storm Control, page 22-1
Configuring Protected Ports, page 22-4
Configuring Port Blocking, page 22-5
Configuring Port Security, page 22-7
Displaying Port-Based Traffic Control Settings, page 22-13
Understanding Storm Control, page 22-2
Default Storm Control Configuration, page 22-2
Enabling Storm Control, page 22-2
Disabling Storm Control, page 22-4
C H A P T E R
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
22
22-1