A&D HW-10KGL Instruction Manual page 29

Weighing each article, the scale makes the accumulation according to
Step 1 Press the
Step 2 Press the
Step 3 Return to the kg mode using the
Press the
Step 4 Put an article on the pan. Wait for the stability mark to be displayed and the
value to blink. Remove the article and, if necessary, press the
Step 5 Weigh additional articles using step 4.
Step 6 Press the
or
This example accumulates the articles that were removed from the pan. The
function parameter is set to
Step 1 Enter into the kg mode using the
Put all articles on the pan and press the
Step 2 Press the
Step 3 Press the
Retun to kg mode with the
Step 4 Remove an article from the pan. Wait for the stability mark to be displayed and
the value to be blinking. Press the
Step 5 Remove additional articles using step 4.
Step 6 Press the
removed, with
switch to display
MODE
switch to reset the accumulation data.
ZERO
switch with nothing on the pan.
ZERO
switch to display the number of articles and total mass with
MODE
displayed.
switch to display
MODE
switch to reset the accumulation data.
ZERO
MODE
switch to display the number of articles and total mass
MODE
or displayed.
HW-G Instruction Manual Page 27
or .
switch.
MODE
.
switch.
MODE
switch.
TARE
or .
switch.
switch.
TARE
.
switch.
ZERO
HW-G OZIM v1a