A&D HW-10KGL Instruction Manual page 19

7.1.1 Type V or Type L with AC adaptor
Step 1 Ensure that the pan is empty.
Step 2 Confirm that local voltage and receptacle type match your scale.
Step 3 The scale turns on/off using the
Step 4 Check the accuracy of weighing. If you calibrate the scale, perform it after
allowing the scale to warm up for 30 minutes.
Step 5 Press the
Step 6 Place something gently onto the pan.
Step 7 You can read the weight after the stability mark is displayed.
Step 8 Remove the item from the pan.
Step 9 Turn the scale off using the
Memo
With the power cord connected, type V consumes only sufficient power for standby
status after turning off the scale.
With the AC adaptor connected, type L consumes only the power of the AC adaptor
after turning off the scale.
switch to display zero. (With nothing on the pan.)
ZERO
ON/OFF
HW-G Instruction Manual Page 17
switch alternately.
ON/OFF
switch.
HW-G OZIM v1a