Timer - Foster 7322 230 User Manual

 Power management :
The cooking hob is equipped with a power limiting system. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed.
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
 Setting and modification of the cooking time
Action
To select the heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts.
 To stop the cooking time
Action
To select « Timer »
To stop the « Timer »
If there are several timers activated you must repeat this operation.
 Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press key [
 Egg timer function
Action
Activate the hob
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking and the timer starts.
 To stop the egg timer function
Action
Activate the hob
To stop the « Timer »
The other heating zone:
[ 9 ] goes to [ 7 ] or [ 8 ] depending the type of zone
Control panel
Press key [ + ] or [ - ]
Press key [ + ] or [ - ]
Press key [ ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ ]
Press key [ - ] then [
Control panel
Press key [ 0/I ]
Press key [ ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ 0/I ]
Press key [ - ] then [ ]
8
(example: power level 9)
Display
[ 4 ] or [ 9 ]
[ 1 ] ... [ 9 ]
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
The remaining time
] Displays [ 00 ] then stops
].
Display
zone control lights are on
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
Timer light blinking
Displays [ 00 ] then stops