Trip Planning - Garmin GTN 750 Pilot's Manual

Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Touch To
Compute RAIM
Proc
Charts
Wpt Info
Map
15.4
Traffic
The GTN 7XX allows the pilot to view desired track (DTK), distance (DIS),
Terrain
estimated time en route (ETE), en route safe altitude (ESA) and estimated time of
arrival (ETA) information for a direct-to, point-to-point between two specified
Weather
waypoints or for any programmed flight plan. This item also displays the sunrise/
sunset times for your destination waypoint (for the selected departure date). All
Nearest
times are based on the time set in System-Setup. The trip planning inputs are
manually entered by the pilot.
Music
The trip statistics are calculated based on the selected starting and ending
Utilities
waypoints and the trip planning inputs.
In Flight Plan mode with a stored flight plan selected, and the entire flight
System
plan (CUM) selected, the waypoints are the starting and ending waypoints of the
selected flight plan.
Messages
In Flight Plan mode with a stored flight plan selected, and a specific leg
Symbols
selected, the waypoints are the endpoints of the selected leg.
Appendix
15-12
Index
4. Touch the Arrival Time key and select the local time of
expected arrival at the selected waypoint.
5. When the Waypoint, Arrival Date, and Arrival Time values have
been entered, touch the Compute RAIM key to determine if
RAIM is available.
Figure 15-13 RAIM Prediction Completed

Trip Planning

Garmin GTN 725/750 Pilot's Guide
RAIM Prediction
Result
190-01007-03 Rev. B