Selecting A Squawk Code - Garmin GTN 750 Pilot's Manual

Pilot's guide

Hide thumbs Also See for GTN 750:

Table of Contents

The selected squawk code will always be in use. As you change a squawk

code, the original code will be used until you are finished selecting the new

Active Squawk

Code Selection

Transponder Is In

Standby Mode

Selecting a Squawk Code

Table 2-1 XPDR Special Squawk Codes

1. Touch the transponder squawk code window at the top of the

2. The XPDR page will be displayed. The Squawk Code value will

be active for selection for use by the active Transponder.

Figure 2-8 XPDR Squawk Code Selection Display

Garmin GTN 725/750 Pilot's Guide

Default VFR code in the USA

Loss of Communications

190-01007-03 Rev. B

Show Quick Links

Table of Contents