Display Vcalc Messages; Terrain; Restore Vcalc Defaults - Garmin GTN 750 Pilot's Manual

15.1.7

Display VCALC Messages

Selecting Display Messages will allow the display of messages about the
VCALC function when they occur. With Display Messages not selected,
VCALC messages will not be displayed.
1. While viewing the VCALC page, touch Display Messages
to toggle the display of VCALC messages in the Message
function.
Touch To Toggle
Messages
Figure 15-10 VCALC Approaching Target Altitude Message
2. Touch the MSG key to toggle the display of available
messages.
15.1.8

Restore VCALC Defaults

While viewing the VCALC page menu, touching the Restore Defaults
key will reset all of the VCALC values back to their default values. The Target
Waypoint will not be changed.
190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
VCALC FPL
Message
Direct-To
Proc
Charts
Wpt Info
Map
Traffic

Terrain

Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
15-9
Index