Unloading The Driver; Updating The Driver - HP LC2000r - NetServer - 128 MB RAM Manual

Unloading the Driver

For removing or updating the driver, perform the following steps:
NOTE
The old driver must be removed before installing the new one.
1. Confirm that there is no Fibre Channel activity occurring by dismounting the
drive.
2. Switch to the Command Console
3. To dismount the drive,
Type:
Dismount volume_name <return>
NOTE The volume_name is the volume that the user has created. If more
than one volume needs to be dismounted, perform the dismount
command for each individual volume.
4. To remove the driver,
Type:
Unload AFCNW.HAM <return>
When the driver is successfully removed, an acknowledgement from the system
displays the message:
driver unloaded
The controller card is now deactivated.

Updating the Driver

To update the driver, first perform the unload procedure, then the load procedure detailed
above.
19