HP LC2000r - NetServer - 128 MB RAM Manual page 9

Fibre channel host bus adapter

Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:

Table of Contents

Figure 1-1. 32/64 bit PCI, 33 MHz PCI, 1 Gbit

The HP Fibre Channel Adapter installs into a standard PCI (Peripheral

Component Interconnect) slot. This adapter supports a high performance 64-bit

PCI bus (backward compatible to 32-bit) with multiplexed address and data

lines, and parity information. The PCI bus provides a high speed (up to 264/132

Megabytes/sec) path between the system board and the Fibre Channel Adapter.

The HP Fibre Channel Adapter is a PCI Bus Master device and conforms to the

PCI Local Bus Specifications version 2.1.

The D8602B Fibre Channel Adapter requires the installation of a Gigabit

Interface Converter (GBIC) module before connecting the Fibre Channel

cables. See the GBIC Overview section in Chapter 2.

Table of Contents