Verifying The Adapter - HP LC2000r - NetServer - 128 MB RAM Manual

Fibre channel host bus adapter
Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:
Table of Contents

Advertisement

Figure 2-5. Removing the Optical GBIC Module
Figure 2-6. Removing the HSSDC Copper GBIC Module

Verifying the Adapter

You can verify the Adapter and cable installation by powering up the system
and looking at the two LEDs on the bulkhead of the adapter. See Figure 2-7. on
page 11. Under normal operation, the LEDs operate as follows:
10

Advertisement

Table of Contents
loading

Table of Contents