5 Slide the drive-release latch towards the base of the computer to release
the shoulder screw, and then slide the drive out of the drive bay.
1
1
drive-release latch
6 Replace the drive panel (see "Installing the Drive Panel" on page 54).
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
8 Connect your computer and devices to electrical outlets, and then turn
them on.
Installing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 13).
56
Drives
2
2
floppy drive