Dell XPS 630i Service Manual page 65

3 Remove the drive panel (see "Removing the Drive Panel" on page 53).
4 Remove the existing CD/DVD drive, if applicable (see "Removing a
CD/DVD Drive" on page 63).
5 Prepare the CD/DVD drive for installation and check the documentation
that accompanied the drive to verify that the drive is configured for your
computer.
NOTE:
If you are installing an IDE drive, configure the drive for the cable
select setting.
6 If no screws are attached to the drive, check the inside of the drive panel
for screws and, if screws are present, attach the screws to the new drive.
1 CD/DVD drive
7 Gently slide the drive into the drive bay until it clicks into place.
1
2 shoulder screws (3)
2
65
Drives