Front I/O Panel Cables - Dell XPS 630i Service Manual

1 SATA connector
3 SATA connector hard drive

Front I/O Panel Cables

NOTE:
Most of the front I/O panel, fan, and light cables have similar connectors.
The number of pins and the location of the cable key or missing pin may vary.
1 connector on the system board
3 cable key
To disconnect the front I/O panel cable, hold the cable by the connector and
then pull it away from the system board.
NOTICE:
You must align the cable key with the missing pin correctly. Incorrect
alignment can cause damage to the equipment.
When connecting the front I/O panel cable, hold the cable by the connector
and align the cable key with the missing pin on the system board connector;
then press firmly into the connector.
3
2
2 SATA connector on the system board
2 missing pin
1
117
Cables