3 Align the securing tabs on the front panel with the corresponding slots on
the chassis; connect the FRONT_LED cable to the front panel.
2
1
1
front panel
3
securing tabs (4)
4 Rotate the front panel towards the computer until it snaps into place.
5 Replace the drive panel (see "Installing the Drive Panel" on page 54).
6 Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
7 Connect your computer and devices to electrical outlets, and then turn
them on.
Removing the Rear LED Board
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 13).
3
2
FRONT_LED cable
107
Lights