Dell XPS 630i Service Manual page 85

1
1 processor cover
3 socket
5 socket pin-1 indicator
NOTICE:
Socket pins are delicate. To avoid damage, ensure that the processor is
aligned properly with the socket, and do not use excessive force when you install
the processor. Be careful not to touch or bend the pins on the system board.
2 Set the processor lightly in the socket and ensure that the processor is
aligned in the socket. When the processor is positioned correctly, apply
minimal pressure to seat it.
3 When the processor is fully seated in the socket, close the processor cover.
4 Pivot the socket release lever back toward the socket and snap it into place
to secure the processor.
5 Replace the processor heatsink (see "Installing the Processor Heatsink" on
page 80).
6 Reconnect the power cables to the POWER and 12V_ATXP connectors
(see "System Board Components" on page 16) on the system board.
5
2 processor
4 socket release lever
2
3
4
Processor
85