Network Adapter And Sound Card Settings - Dell XPS 630i Service Manual

Network Adapter and Sound Card Settings

If you have installed a sound card:
1 Disconnect the FP_AUDIO cable from the system board (see "System
Board Components" on page 16) and connect it to the internal audio
connector on your sound card.
2 Connect external audio devices to the sound card connectors. Do not
connect external audio devices to the microphone, speaker/headphone, or
line-in connectors on the back panel.
3 Enter system setup (see "Entering System Setup" in your Owner's
Manual), select Integrated Audio Controller, and then change the setting
to Off.
If you have removed a sound card:
1 Enter system setup (see "Entering System Setup" in your Owner's
Manual), select Integrated Audio Controller, and then change the setting
to On.
2 Connect external audio devices to the audio connectors on the back panel
of the computer.
If you have installed an add-in network adapter and want to disable the
integrated network adapter:
1 Enter system setup (see "Entering System Setup" in your Owners's
Manual), select Integrated NIC Controller, and then change the setting
to Off.
2 Connect the network cable to the add-in network adapter connectors.
Do not connect the network cable to the integrated connector on the back
panel.
If you have removed an add-in network connector:
1 Enter system setup (see "Entering System Setup" in your Owners's
Manual), select Integrated NIC Controller, and then change the setting
to On.
2 Connect the network cable to the integrated connector on the back panel
of the computer.
43
Cards