HP StorageWorks 7110 - Virtual Array Using Manual page 31

TESTDEVICE
Selects devices for testing.
Syntax
testdevice [controller | disk | lcc]
Description
This command selects either the controller, disk, or JBOD LCC as the device to test and where the
command can be executed by any one of the devices. If only the controller can execute the
command, then the TESTDEVICE variable will not have any meaning because the command will
still go to the controller even if TESTDEVICE is set to the disk. It might be easier to use the fru
command to select the device because it automatically sets the LOOPPAIR, ENCLOSURE, SLOT,
and TESTDEVICE variables.
Examples
To set the testdevice to the controller for a firmware download
VADIAG> testdevice controller
VADIAG> download
To display the value of TESTDEVICE:
VADIAG> testdevice
TestDevice: Controller
TESTDEVICE
31