HP StorageWorks 7110 - Virtual Array Using Manual page 21

RANGE
Selects blocks for testing by the ROMT and WRTMT commands.
Syntax
range [start_block/[end_block]],[start_block/[end_block]],...
Description
This command selects multiple blocks for testing by the romt and wrtmt commands. The value of
the RANGE variable identifies the selected blocks.
Examples
To select block 4000 and blocks 6000 through 7000:
VADIAG> range 4000,6000/7000
To display the value of the RANGE variable:
VADIAG> range
The selected disk has blocks from 0 to 20971519
Range: NOT SET
RANGE
21