HP StorageWorks 7110 - Virtual Array Using Manual page 15

ENCLOSURE
Sets the enclosure ID.
Syntax
enclosure [enclosure ID]
Description
This command sets the ENCLOSURE variable which is used to access JBOD LCCs and disks. The
ENCLOSURE variable along with the LOOPPAIR and SLOT variables identify the component of
interest.
The ENCLOSURE variable should always be set to a value of 0.
Examples
To set the enclosure ID to 0:
VADIAG> enclosure 0
To display the current value of ENCLOSURE:
VADIAG> enclosure
EnclosureID: 0
ENCLOSURE
15