HP StorageWorks 7110 - Virtual Array Using Manual page 13

DISKSTATE
Displays the physical disk drive map.
Syntax
diskstate
Description
This command displays the state of the selected controller and the state of the disk drives located in
the main enclosure. The storage type (Map/User column) indicates if the disk is used for user data
storage (US), meta data storage (MS) (Map Disk), or both. The EID column shows the enclosure
ID. An asterisk (*) in the Disk Slot column indicates the selected disk slot. The Initialization State
column indicates the result of the controller's attempt to initialize the disk during power-on or disk
addition.
Example
VADIAG> diskstate
Loop
Fru Pair EID
--------- ----- ----- ----- ----- ------------ ----------------------
M/D7 255 0
M/D1 255 0
M/D3 255 0
M/D5 255 0
JA0/D1 0 0
JA0/D2 0 0
JA0/D3 0 0
JA0/D5 0 0
JA0/D7 0 0
M/D9 255 0
M/D13 255 0
M/D14 255 0
Disk Map/
Slot User Drive State
22 US/MS Included
16 US/MS Included
18 US Included
20 US Included
0 US Included
1 US Included
2 US Included
4 US Included
6 US Included
24 US Included
28 US Included
29 US Included
Initialization State
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
Ready
DISKSTATE
13