HP StorageWorks 7110 - Virtual Array Using Manual page 30

SLOT
Sets the disk slot.
Syntax
slot [slot]
Description
This command sets the SLOT variable which is used to access the main enclosure disks. The SLOT
variable along with the LOOPPAIR and ENCLOSURE variables identify the component of
interest. It might be easier to use the fru command to identify the component because it
automatically sets the LOOPPAIR, ENCLOSURE, and SLOT variables.
In ODE, the main enclosure disk slots (1-15) are in the range of 16 through 30.
Examples
To select the disk in slot 9:
VADIAG> slot 24 ((16 + 9) - 1)
VADIAG> looppair 255 (main enclosure)
VADIAG> enclosure 0 (main enclosure)
To display the current value of SLOT:
VADIAG> slot
Slot: 1
SLOT
30