System Battery Replacement - HP ProLiant DL388e User Manual

Hp proliant dl388e gen8 server user guide
Hide thumbs Also See for ProLiant DL388e:
Table of Contents

Advertisement

System battery replacement

If the server no longer automatically displays the correct date and time, you might have to replace the battery
that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 18).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 18).
o
Remove the server from the rack (on page 20).
o
Remove the access panel (on page 21).
4.
Remove the PCI riser cage
5.
Locate the battery on the system board
6.
Remove the battery.
7.
The computer contains an internal lithium manganese dioxide, a vanadium
("Remove the PCI riser
("System board
cages" on page 23).
components" on page 12).
System battery replacement 111

Advertisement

Table of Contents
loading

Table of Contents