Removing A Hard Drive Blank; Removing A Hot-Plug Scsi Hard Drive - HP DL560 - ProLiant - 1 GB RAM User Manual

Removing a Hard Drive Blank

Removing a Hot-Plug SCSI Hard Drive

1. Determine the status of the hard drive from the hot-plug hard drive LEDs.
2. Back up all server data on the hard drive.
3. Remove the hard drive.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
Hardware Options Installation 63