Installing The Server Into The Rack - HP DL560 - ProLiant - 1 GB RAM User Manual

44 HP ProLiant DL560 Server User Guide
•
Item
1
2
3
4

Installing the Server into the Rack

Follow the steps in this section if you are installing the server into a rack with
square holes. If you are installing the server into a rack with round holes, order
the appropriate rack installation option kit, and then refer to the installation
instructions that ship with the option kit for more information.
If you are installing the server into a telco rack, order the appropriate option kit at
the RackSolutions.com website (http://www.racksolutions.com/hp). Follow the
server-specific instructions on the website to install the rack brackets. After
installing the brackets, follow the steps in this section.
Options to be installed
Description
Server rails
Left and right standard rack rail assemblies
Cable management arm
Rack template
NOTE: The steps in this section work with most third-party racks with
square holes. If they do not work with the rack you are using, order the
option kit for racks with round holes.