Hot-Plug Tape Drive Option - HP DL560 - ProLiant - 1 GB RAM User Manual

Hp proliant dl560 server user guide
Hide thumbs Also See for DL560 - ProLiant - 1 GB RAM:
Table of Contents

Advertisement

Hot-Plug Tape Drive Option

1. Remove the existing hard drive blank or hard drive from the upper-left drive
2. Remove the tape drive blank.
3. Install the tape drive.
bay ("Removing a Hard Drive Blank" on page 63, "Removing a Hot-Plug
SCSI Hard Drive" on page 63).
a. Reach underneath and squeeze the middle of the tape drive blank (1).
b. Pull the blank out of the bay (2).
Hardware Options Installation
65

Advertisement

Table of Contents
loading

Table of Contents