Table 7 Rail Positions For Sequential Disk Systems - HP StorageWorks 2300 - Disk System User Manual

50 Installation
3. Locate a place on the rack columns with the available space required
for the installation of the storage device. The storage device and the
rail kit require 3 EIA units of space.
Use the following table as a guide for placement of the rails in a Rack System/E
where multiple disk systems will be installed. You can rack multiple disk systems
without gaps installing rails every three EIA units. For example, starting at the
bottom of a 2-meter rack, set rails at the following unit/hole locations:
Table 7 Rail Positions for Sequential Disk Systems
Disk Systems
One
Two
Three
Four
Five
Six
Seven
Eight
Nine
Ten
Eleven
Hole from Rack Bottom
1
4
7
10
13
16
19
22
25
28
31