Installing A 1 Ghz Processor Heatsink; Attaching The Fan Heatsink Over The Processor - Intel S815EBM1 - Server Board Motherboard Product Manual

Installing a 1 GHz Processor Heatsink

✏
NOTES
These instructions do NOT apply to the processors in the FCPGA-2 type of packaging. Processors
in the FCPGA-2 type of packaging include an Integrated Heat Spreader (IHS) on the processor
package and require a different fan heatsink. Integration of the fan heatsink shown below with
processors in the FCPGA-2 packaging will result in using the thermal solution provided with the
board in a configuration that is out of specification and will void this server board warranty. For
more details on processors specifically supported with this board and the included thermal
solution please refer to:
http://support.intel.com/support/motherboards/server/S815EBM1/
To install a 1 GHz processor, follow the instructions given on page 24, Figure 7. Follow the
instructions below to install the fan heatsink to the processor:
1. Attach the fan heatsink to the processor making sure the notch at the bottom of the heatsink is
aligned on the processor socket label side (see Figure 11, A).
Upgrading
A
Figure 11. Attaching the Fan Heatsink Over the Processor
OM11063
27