2. Insert the PCI card edge connector in the slot on the PCI riser.
3. Insert the riser card with the attached PCI card into the PCI slot on the server board.
Press firmly on the riser card until it is fully seated. Press down on the riser card—
do NOT press down on the PCI card.
Caution: Press the riser card straight down into the slot. Tipping it in the slot while installing it may
damage the riser card or slot on the server board.
4. Use the screw removed in Step 1 to secure the riser card assembly to the chassis.
Intel® Server Board S3420GPRX User Guide
Figure 18. Removing the PCI Riser Assembly from the Server System
A d d - in C a r
Figure 19. Installing a PCI Card in a Riser Card
Riser Connector
Riser Assembly
Supports one
PCIe* card.
d
R is e r C a r d
29