Table of Contents
Advertisement
DNS Configuration
................................ Type in the IP address of DNS server
on the network connected to the pro-
jector. 12 numeric characters are used.
Domain Name ......... Type in domain name of the network
connected to the projector. Up to 60 al-
phanumeric characters can be used.
Network Type (required for wireless only)
Mode:
Select communication method when using wireless LAN.
Infrastructure ........... Select this option when communicating
with one or more equipment connected
to the wireless or wired LAN network
via an access point.
802.11 Ad Hoc ........ Select this option when using the wire-
less LAN to communicate with a com-
puter in a one-to-one correspondence.
This is a method that meets the
IEEE802.11 wireless standard.
Ad Hoc .................... Select this option when using the wire-
less LAN to communicate with a com-
puter in a one-to-one correspondence.
Easy Connection ..... This allows you to easily set up wire-
less LAN connection. See the supplied
Software Utility Installation Guide for
more information.
SSID (Network name):
Enter an identifier (SSID) for wireless LAN. Communication
can be done only with equipment whose SSID matches SSID
for your wireless LAN. Up to 32 alphanumeric characters can
be used (Case-sensitive).
NOTE: To disable SSID, select a space (null) or "ANY"(All caps).
Channel:
Set this option when selecting [802.11 Ad Hoc] or [Ad Hoc] in
[Mode].
Select a channel number from the pull-down list. The channel
must match for all wireless devices communicating on your
wireless LAN.
NOTE: Channels in the pull-down list are different depending on which
country you live in.
TX rate:
Select a wireless transmission speed. Normally leave it as
Automatic. Try another transmission speed when the connec-
tion fails.
WEP (for Wireless only)
Select this option whether using the WEP (Wired Equivalent
Privacy) key for encryption or not. To use encryption, specify
WEP key.
Disable ........ Will not turn on the encryption feature. Your com-
munications may be monitored by someone.
64bit ............ Uses 64-bit datalength for secure transmission.
128bit .......... Uses 128-bit datalength for secure transmission.
This option will increase privacy and security
when compared to use of 64bit datalength en-
cryption.
NOTE: The WEP settings must be the same as communication de-
vices such as PC or access point in your wireless network. When you
use WEP, your image transmission speed will slow down.
Key Select:
Selects one key from the four keys below when selecting [64bit]
or [128bit] in [WEP].
6-19
6. Using On-Screen Menu
Advertisement
Table of Contents
