Download Print this page
NEC WT610E Quick Setup Manual
NEC WT610E Quick Setup Manual

NEC WT610E Quick Setup Manual

Short throw projector
Hide thumbs Also See for WT610E:

Advertisement

STEP-BY-STEP PROJECTOR PLACEMENT FOR FRONT SCREEN TABLE TOP USE
1.
PROJECTOR PLACEMENT
Place projector on table in front of screen or
wall which will be used for displaying image.
2.
OPENING THE MIRROR
Unlock mirror cover lock switch and open
top mirror door to the open position (figure 1).
3.
CONNECTING THE POWER
Plug power cord into projector and AC outlet.
(See Figure 1 for AC Power connection.)
4.
TURNING ON THE WT610E
Turn on the main power to the projector; press the PROJECTOR POWER
SWITCH (figure 1) to the on position. Press the POWER (ON/STAND BY)
button on the projector cabinet (figure 2) or POWER ON button on the
remote control (figure 5) for a minimum of 2 seconds, when the POWER
INDICATOR turns a steady green the projector is ready to use.
5.
PROJECTOR PLACEMENT FOR PROPER SCREEN SIZE
Move projector closer or farther away from screen to fit the width of the
screen or desired size. Maximum screen size is 100" diagonal.
size of the image increases or decreases the displayed vertical image position shifts
depending on screen size (figure 3). Smaller images will have less vertical image
shift than larger screen sizes.; you will need to adjust screen height to
accommodate this shift. The distance between the projector and display surface
cannot be changed without changing image size.
CONTINUED ON REVERSE SIDE...
Quick Set-up Guide
WT610E short throw projector
NOTE
FIGURE 1
FIGURE 2
Image Size (4:3)
Diagonal Width(W) Height(H)
FIGURE 3
inches
as the
40
60
67
72
84
90
100
Image Size (16:9)
Diagonal Width(W) Height(H)
inches
37
40
83
92
B Vertical distance between the bottom of the projector and the screen center
C Throw distance
D Vertical distance between the bottom of the projector and screen bottom
(screen top for ceiling mounted application)
TOP MIRROR
DOOR
COVER
LOCK
SWITCH
PROJECTOR
POWER SWITCH
AC POWER
INLET
B
C
D(4:3)
inches
inches
inches
inches
inches
32
24
26.0
2.5
14.0
48
36
37.0
10.3
19.0
53.6
40.2
40.8
13.1
20.7
57.6
43.2
43.6
15.0
22.0
67.2
50.4
50.2
19.7
25.0
72
54
53.5
22.0
26.5
80
60
59.0
25.9
29.0
B
C
D(16:9)
inches
inches
inches
inches
inches
32
18
26.0
2.5
17.0
35
19.7
28.0
4.0
18.2
72
40.5
53.5
22.0
33.2
80
45
59.0
25.9
36.5
POWER
BUTTON
"MENU
BUTTON

Advertisement

loading

Summary of Contents for NEC WT610E

  • Page 1 INDICATOR turns a steady green the projector is ready to use. PROJECTOR PLACEMENT FOR PROPER SCREEN SIZE Move projector closer or farther away from screen to fit the width of the screen or desired size. Maximum screen size is 100” diagonal.
  • Page 2 PRESENT! For more information, call 1.800.NEC.INFO or visit www.necvisualsystems.com NEC is a registered trademark of NEC Corporation. All other trademarks are the property of their respective owners. All specifications subject to change without notice.