Setting The Bios Configuration Jumper; Location Of The Bios Configuration Jumper; Jumper Settings For The Bios Setup Program Modes (J9H2) - Intel D850EMD2 Product Manual

Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide

Setting the BIOS Configuration Jumper

CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
The location of the board's BIOS configuration jumper (J9H2) is shown in Figure 14.
The three-pin BIOS jumper enables the board configuration to be done in BIOS Setup. Table 5
shows the jumper settings for the Setup program modes.
Table 5.

Jumper Settings for the BIOS Setup Program Modes (J9H2)

Function / Mode
Normal
Configure
Recovery
30
1
3
J9H2
Figure 14. Location of the BIOS Configuration Jumper
Jumper Setting Configuration
1-2 The BIOS uses current configuration information and passwords
1
for booting.
3
2-3 After the POST runs, the BIOS displays the maintenance menu.
1
Use this menu to clear passwords.
3
None The BIOS attempts to recover the BIOS configuration. A
1
recovery diskette is required.
3
OM13627