Ide Auto Configuration; Security Passwords; Lan Subsystem (Optional); Lan Subsystem Software - Intel D850EMD2 Product Manual

Desktop boards
Hide thumbs Also See for D850EMD2:
Table of Contents

Advertisement

Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide

IDE Auto Configuration

If you install an IDE device (such as a hard drive) in your computer, the IDE auto-configuration
utility in the BIOS automatically detects and configures the device for your computer. You do not
need to run the BIOS Setup program after installing an IDE device. You can override the
auto-configuration options by specifying manual configuration in the BIOS Setup program.
To use ATA-66/100 features, the following items are required:
An ATA-66/100 peripheral device
An ATA-66/100 compatible cable
ATA-66/100 operating system device drivers

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the computer. A supervisor password and a user password can be set for the
Setup and for booting the computer, with the following restrictions:
The supervisor password gives unrestricted access to view and change all Setup options. If
only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives
the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the supervisor
password or the user password to access Setup. Setup options are then available for viewing
and changing depending on whether the supervisor or user password was entered.
Setting a user password restricts who can boot the computer. The password prompt is
displayed before the computer is booted. If only the supervisor password is set, the computer
boots without asking for a password. If both passwords are set, you can enter either password
to boot the computer.

LAN Subsystem (Optional)

The optional Intel 82562ET (in conjunction with the Intel 82801BA ICH2) provides a Fast
Ethernet PCI LAN subsystem providing both 10Base-T and 100Base-TX connectivity.
Features include:
32-bit, 33-MHz direct bus mastering on the PCI bus
Shared memory structure in the host memory that copies data directly to/from host memory
A single RJ-45 connector with connection and activity status LEDs
Jumperless configuration; the LAN subsystem is completely software configurable

LAN Subsystem Software

For Intel 82562ET Fast Ethernet PCI LAN software and drivers, refer to the D850EMD2 and
D850EMV2 link on Intel's World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

D850emv2D850emv2l - desktop board motherboard

Table of Contents