Using The Setup Program; Bios Setup Program Menu Bar - Intel D850EMD2 Product Manual

4 Using the Setup Program

The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
✏
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel Desktop Board D850EMD2/D850EMV2 Technical Product
Specification or the Intel World Wide Web site:
http://support.intel.com/support/motherboards/desktop
✏
NOTE
For reference purposes, you should write down the current Setup settings. When you make
changes to the settings, update this record.
✏
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
MV85010A.86A. Boards with other BIOS identifiers might have differences in some of the Setup
menu screens.
The Setup screen menu bar is shown below.
Maintenance
Table 6 shows the BIOS Setup program menu bar.
Table 6.

BIOS Setup Program Menu Bar

Maintenance
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures
extended
configuration
memory settings
* For information about the BIS, refer to the Intel World Wide Web site at:
http://developer.intel.com/design/security/index1.htm
Main Advanced
Main Advanced
Allocates Configures
resources for advanced
hardware features
components available
through the
chipset
Security Power
Security Power
Sets Configures
passwords power
and security management
features features
Boot Exit
Boot Exit
Selects boot Saves or
options and discards
power changes to
supply set program
controls options
39