Setting The Bios Configuration Jumper Block - Intel D845GVAD2 Quick Reference

Setting the BIOS Configuration Jumper Block

CAUTION
Always turn off the power and unplug the power cord from the computer
before changing the jumper block settings. Moving the jumper with the
power on may result in unreliable computer operation.
The BIOS configuration jumper block determines the operating mode of the
BIOS Setup Program and enables BIOS recovery in the event of a failed
BIOS update (see the previous illustration for the location of the jumper block).
The following table describes the jumper block settings for the BIOS Setup
configuration jumper.
BIOS Setup Configuration Jumper Block (J9H2) Settings
Jumper Setting Mode
Normal (default)
1-2
3
1
Configure
2-3
3 1
Recovery
None
3
1
*To update or recover the BIOS, see the instructions in the Intel Desktop Board D845GVAD2
Product Guide on the Intel Express Installer CD-ROM
For a complete list of BIOS Setup settings, see:
•
The Intel Desktop Board D845GVAD2 Product Guide on the Intel Express
Installer CD-ROM
•
The Intel World Wide Web Site at
http://support.intel.com/support/motherboards/desktop/
Intel Desktop Board D845GVAD2
Quick Reference
Description
The BIOS uses the current configuration and
passwords for booting.
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
The BIOS recovers data from a recovery
diskette in the event of a failed BIOS update.*
.
11