Processor; Processors Supported By The Desktop Boards - Intel D850EMD2 Product Manual

Processor

CAUTION
Failure to use an ATX12V power supply, or not connecting the additional power supply lead to the
Desktop Board D850EMD2 or D850EMV2 may result in damage to the desktop board and/or
power supply.
The desktop boards support a single Intel Pentium 4 processor. Processors are not included with
the desktop board and must be purchased separately.
The processor connects to the desktop board through the mPGA 478-pin socket. The Pentium 4
processor may be removed and replaced to accommodate supported higher speed processors.
For instructions on how to install a processor, see Chapter 2 on page 21.
The desktop boards support the processors listed in Table 2.
Table 2.

Processors Supported by the Desktop Boards

Type
®
Intel Pentium 4 processor on .13 micron
process in an mPGA478 package
Intel Pentium 4 processor on .13 micron
process in an mPGA478 package
Intel Pentium 4 processor on .18 micron
process in an mPGA478 package
For the latest information on processor support for the Desktop Boards D850EMD2 and
D850EMV2, refer to the Intel desktop board World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
For instructions on installing or upgrading the processor, see Chapter 2 on page 21.
The Desktop Boards D850EMD2 and D850EMV2 require an ATX12V compliant power supply to
function according to desktop board specifications. Both desktop boards have two ATX12V
compliant power supply connectors that are needed to provide extra power to the Intel 850E
chipset and Pentium 4 processor.
Items B and E in Figure 18 on page 60 and items C and F in Figure 19 on page 61 show the two
power connector locations.
Designation
2.53, 2.40 and 2.26 GHz 533 MHz
2.20, 2A, 1.80A, 1.70A,
and 1.60A GHz
2, 1.90, 1.80, 1.70, 1.60,
and 1.50 GHz
Desktop Board Features
Front Side Bus
Frequency L2 Cache
512 KB
400 MHz 512 KB
400 MHz 256 KB
11