Table of Contents
Advertisement
58 electrolux installation
A
B
A
1. Open loading door.
2. Unscrew hinge A from the front of the machine and take off the loading door.
3. Remove cover plates B and C. To do this, insert a thin screwdriver into the slots
as shown in the illustration, press downwards slightly and pry out the cover
plates.
4. Use an appropriate tool and exert pressure to unfasten locking block D from
the snap-on fixture, take out and re-insert on the other side having rotated the
block through 180°.
5. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the
opposite side and screw down.
6. Re-insert cover plates B and C on the opposite site having first rotated them
through 180°.
C
D
C
Advertisement
Table of Contents
